Cavity wall tie model Well-L
- Approved for cavity width of 150 - 200 mm
- V4A high grade stainless steel wall tie for fixing in masonry facing with or without insulation.
- Embedment into inner leaf 50 mm (L-form)
- Embedment into outer leaf 50 mm (wavy end)
- Due to the wavy end there is no need to bend it into the outer leaf.
- The low daylight in the groove through the flat corrugation is the standard of the DIN 1053-1.
| Article no. | Name | Cavity width | Box |
| 10600 | Well-L 3 x 225 | up to 100 mm | 250 |
| 10610 | Well-L 3 x 250 | up to 125 mm | 250 |
| 10620 | Well-L 3 x 275 | up to 150 mm | 250 |
| 10630 | Well-L 3 x 300 | up to 175 mm | 250 |
| 10640 | Well-L 3 x 340 | up to 215 mm | 250 |
| Article no. | Name | Cavity width | Box |
| 10650 | Well-L 4 x 225 | up to 100 mm | 250 |
| 10660 | Well-L 4 x 250 | up to 125 mm | 250 |
| 10670 | Well-L 4 x 275 | up to 150 mm | 250 |
| 10680 | Well-L 4 x 300 | up to 175 mm | 250 |
| 10690 | Well-L 4 x 340 | up to 215 mm | 250 |
- Actual lenght=name less 25 mm, due to no need of bending
Accessoires
- Iso-Clip ... show product >>
Product information
 |
DIN 1053 Auszug englisch.pdf (300 kb) | |
|
Montagehinweis Well-L.pdf (236 kb) |
Certificates
|
Z-17.1-825.PDF (777 kb) |
