Plug cavity wall tie PU-Welle
- System of cavity wall tie and insulation fixing for fixing of hard insulation boards on back walls of concrete or solid masonry.
- Material of the wall tie: stainless steel 1.4401 / 1.4362.
- Minimisation of thermal bridges, the hard insulation boards will not pushed over the wall ties.
- „Clean“ processing, the drill hole will be covered completely by the insulation fixing.
- Due to the wavy end there is no need to bend the anchor into the outer leaf.
| Article no. | Name | Insulation thickness | Air layer | Box |
| 10500 | 155/250 | up to 105 mm | up to 20 mm | 250 |
| 10510 | 155/275 | up to 105 mm | up to 40 mm | 250 |
| 10520 | 155/300 | up to 105 mm | up to 60 mm | 250 |
| 10530 | 175/275 | up to 125 mm | up to 20 mm | 250 |
| 10540 | 175/300 | up to 125 mm | up to 50 mm | 250 |
| 10550 | 175/350 | up to 125 mm | up to 100 mm | 250 |
| 10560 | 195/300 | up to 145 mm | up to 20 mm | 250 |
| 10570 | 195/350 | up to 145 mm | up to 80 mm | 250 |
- Incl. 1 drive-in pipe per box
Accessoires
- Iso-Clip ... show product >>
Product information
 |
PU-Welle.pdf (571 kb) |
