Cavity wall tie model ZV-Welle
- The cavity wall tie model ZV-Welle, approved by the supervisory building authority Deutsches Institut für Bautechnik, is a one-piece fastening component consisting of a V4A wire anchor (stainless steel grade 316 and pre-assembled B3S plug)
- DBGM (German design patent) approved for cavity width up to 200 mm.
- The cavity wall tie model ZV-Welle can be used for fixing brick facing to back walls of concrete and solid brick.
- The processing time is reduced to a minimum due to the pre-assembly of the two components.
- Due to the wavy end there is no need to bend the anchor into the outer leaf.
- Processing mistakes are nearly impossible as a drive in pipe is included to each box.
| Article no. | Name | Cavity width | Box |
| 13000 | 4,0 x 160 | up to 25 mm | 250 |
| 13010 | 4,0 x 180 | up to 45 mm | 250 |
| 13020 | 4,0 x 210 | up to 75 mm | 250 |
| 13030 | 4,0 x 250 | up to 115 mm | 250 |
| 13040 | 4,0 x 275 | up to 140 mm | 250 |
| 13050 | 4,0 x 300 | up to 165 mm | 250 |
| 13060 | 4,0 x 320 | up to 185 mm | 250 |
| 13070 | 4,0 x 350 | up to 200 mm | 250 |
- Further dimensions available on request
- Actual length = name less 25 mm, due to no need of bending
- Incl. 1 drive-in pipe per box
Accessoires
- Article no. 11230 = Iso-Clip ... show product >>
Product information
 |
DIN 1053 Auszug englisch.pdf (300 kb) | |
|
Montagehinweis ZV-Welle.pdf (409 kb) |
Certificates
|
Zulassung Z-17.1-825 DiBt.PDF (777 kb) | |
|
Zulassung Z-21.2-1009 DiBt.pdf (566 kb) |
