Concrete drive-in wall tie model ZM 4-6 Welle
- The concrete drive-in wall tie model ZM 4-6 Welle is a one-piece fastening component made entirely from V4A high-grade stainless steel and consisting of a wire anchor with a pre-assembled expanding sleeve.
- The system can be used for fixing brick facing to back walls of concrete (fire protection category A DIN 4102).
- The processing time is reduced to a minimum due to the pre-assembly of the two components.
- Due to the wavy end there is no need to bend the anchor into the outer leaf.
| Article no. | Dimensions | Cavity width | Box |
| 13600 | 4,0 x 175 mm | up to 85 mm | 250 |
| 13605 | 4,0 x 200 mm | up to 110 mm | 250 |
| 13610 | 4,0 x 225 mm | up to 135 mm | 250 |
| 13620 | 4,0 x 250 mm | up to 160 mm | 250 |
| 13625 | 4,0 x 275 mm | up to 185 mm | 250 |
| 13635 | 4,0 x 300 mm | up to 210 mm | 250 |
| 13650 | 4,0 x 350 mm | up to 260 mm | 250 |
| 13660 | 4,0 x 400 mm | up to 310 mm | 250 |
- Further dimensions available on request
- Finish in stainless steel A2 also available
- Finish without wave available on request
Accessoires
- Iso-Clip ... show product >>
- Setting tool for ZM Welle
- 6 x 40 mm SDS-plus hammer action drill ... show product >>
Product information
 |
DIN 1053 Auszug englisch.pdf (300 kb) | |
|
Montagehinweis ZM-Welle.pdf (900 kb) |
