Cavity wall tie model PB 10
- The cavity wall tie model PB 10, approved by the supervisory building authority Deutsches Institut für Bautechnik, consists of a V4A threaded anchor and a B3S special plug.
- The system can be used for fixing brick facing to back walls of aerated concrete, aircrete blocks (Ytong ...).
- A screwdriver and screw adapter are required for proper installation.
- Due to the wavy end there is no need to bend the anchor into the outer leaf.
| Article no. | Dimensions | Cavity width | Box |
| 12200 | 4,0 x 160 mm | up to 60 mm | 250 |
| 12210 | 4,0 x 200 mm | up to 100 mm | 250 |
| 12220 | 4,0 x 225 mm | up to 125 mm | 250 |
| 12230 | 4,0 x 250 mm | up to 150 mm | 250 |
| 12240 | 4,0 x 275 mm | up to 200 mm | 250 |
- incl. 1 screwdriver per box
Accessoires
- Screw adapter ... show product >>
Product information
 |
DIN 1053 Auszug englisch.pdf (300 kb) | |
|
Montagehinweis PB-10.pdf (2046 kb) |
Certificates
|
Zulassung Z-17.1-825 DiBt.PDF (777 kb) | |
|
Zulassung Z-21-2-1546 DiBt.pdf (659 kb) |
