Wood screw „SPS Bohr“ galvanised steel
- Countersunk flat head with ribs under head
- Yellow galvanised
- T-Rox recess
- Partial thread
- Cut point type 17
- Optimized package
| Article no. | Dimensions | T-Rox | Box |
| 43000 | 3,5 x 16 mm | T10 | 1.000 |
| 43005 | 3,5 x 20 mm | T10 | 1.000 |
| 43010 | 3,5 x 25 mm | T10 | 1.000 |
| 43015 | 3,5 x 30 mm | T10 | 1.000 |
| 43020 | 3,5 x 35 mm | T10 | 1.000 |
| 43025 | 3,5 x 40 mm | T10 | 500 |
| 43030 | 4,0 x 20 mm | T20 | 1.000 |
| 43035 | 4,0 x 25 mm | T20 | 1.000 |
| 43040 | 4,0 x 30 mm | T20 | 1.000 |
| 43045 | 4,0 x 35 mm | T20 | 1.000 |
| 43050 | 4,0 x 40 mm | T20 | 500 |
| 43055 | 4,0 x 45 mm | T20 | 500 |
| 43060 | 4,0 x 50 mm | T20 | 500 |
| 43065 | 4,0 x 60 mm | T20 | 500 |
| 43070 | 4,0 x 70 mm | T20 | 500 |
| 43075 | 4,5 x 30 mm | T25 | 500 |
| 43080 | 4,5 x 35 mm | T25 | 500 |
| 43085 | 4,5 x 40 mm | T25 | 500 |
| 43090 | 4,5 x 45 mm | T25 | 500 |
| 43095 | 4,5 x 50 mm | T25 | 500 |
| 43100 | 4,5 x 60 mm | T25 | 200 |
| 43105 | 4,5 x 70 mm | T25 | 200 |
| 43110 | 5,0 x 30 mm | T25 | 500 |
| 43115 | 5,0 x 35 mm | T25 | 500 |
| 43120 | 5,0 x 40 mm | T25 | 500 |
| 43125 | 5,0 x 45 mm | T25 | 500 |
| 43130 | 5,0 x 50 mm | T25 | 200 |
| 43135 | 5,0 x 60 mm | T25 | 200 |
| 43140 | 5,0 x 70 mm | T25 | 200 |
| 43145 | 5,0 x 80 mm | T25 | 200 |
| 43150 | 5,0 x 90 mm | T25 | 100 |
| 43155 | 5,0 x 100 mm | T25 | 100 |
| 43160 | 6,0 x 50 mm | T30 | 200 |
| 43165 | 6,0 x 60 mm | T30 | 200 |
| 43170 | 6,0 x 70 mm | T30 | 200 |
| 43175 | 6,0 x 80 mm | T30 | 200 |
| 43180 | 6,0 x 90 mm | T30 | 100 |
| 43185 | 6,0 x 100 mm | T30 | 100 |
| 43190 | 6,0 x 110 mm | T30 | 100 |
| 43195 | 6,0 x 120 mm | T30 | 100 |
| 43200 | 6,0 x 130 mm | T30 | 100 |
| 43205 | 6,0 x 140 mm | T30 | 100 |
| 43210 | 6,0 x 150 mm | T30 | 100 |
| 43215 | 6,0 x 160 mm | T30 | 100 |
| 43220 | 6,0 x 180 mm | T30 | 100 |
| 43225 | 6,0 x 200 mm | T30 | 100 |
| 43230 | 6,0 x 220 mm | T30 | 100 |
- Required from the woodworking industry
- Quick and safe fastening
- Head reinforced
- The self drilling point enable a time saving
- Efficient work without pre-drilling
- Due to the ribs under head there is no need to countersink, no splitting or cracking of the wood at screwing into edges
- With T-Rox drive
Product information
 |
SPS_Bohr_verzinkt.pdf (170 kb) |
