Adjusting screws
- Made of galvanised steel
- With countersunk head and T-25 Torx drive steel hardened
- Slats can install at a specific distance from wooden constructions using an electric screwdriver, without a constant need to adjust it
- The adjusting screw can be screwed into timber through the wooden slat without the need for pre-drilling.
- Once the screw has been screwed in completely, the wooden slat´s distance from the rest of the construction can be adjusted exactly by turning the screw to the left
- No more need for wedges or blocks
| Article no. | Dimensions | Box | Outer box |
| 51300 | 6 x 60 mm | 200 | 2.400 |
| 51310 | 6 x 70 mm | 200 | 2.400 |
| 51320 | 6 x 80 mm | 200 | 2.400 |
| 51330 | 6 x 90 mm | 200 | 2.400 |
| 51340 | 6 x 100 mm | 100 | 1.200 |
| 51350 | 6 x 110 mm | 100 | 1.200 |
| 51360 | 6 x 120 mm | 100 | 1.200 |
| 51370 | 6 x 130 mm | 100 | 1.200 |
| 51380 | 6 x 145 mm | 100 | 1.200 |
- Wood on wood installation
- Time-saving, efficient work without pre-drilling
- Precise, easy installation at a specific distance by adjusting the screw
- No need for aids such as wedges and blocks
