Cavity wall tie model PB 10
The cavity wall tie model PB 10, approved by the supervisory building authority Deutsches Institut für Bautechnik, consists of a V4A threaded anchor and a B3S special plug.
Approved for cavity width up to 250 mm.
The system can be used for fixing brick facing to back walls of aerated concrete, aircrete blocks (Ytong ...). A screwdriver and screw adapter are required for proper installation. Due to the wavy end there is no need to bend the anchor into the outer leaf.
- incl. 1 screwdriver per box
Product images
Article data
| Article no. | Dimensions | Cavity width | Box |
|---|---|---|---|
| 12200 | 4,0 x 160 mm | up to 60 mm | 250 |
| 12210 | 4,0 x 200 mm | up to 100 mm | 250 |
| 12220 | 4,0 x 225 mm | up to 125 mm | 250 |
| 12230 | 4,0 x 250 mm | up to 150 mm | 250 |
| 12240 | 4,0 x 275 mm | up to 200 mm | 250 |
| 12241 | 4,0 x 330 mm | up to 230 mm | 250 |
| 12244 | 4,0 x 350 mm | up to 250 mm | 250 |
Accessories:
Article no. 11230 = Iso-Clip ... show product >>
Article no. 11240 = Iso-Clip black... show product >>
Article no. 11200 = Clamping plate ... show product >>
Article no. 11000 = Water draining disc ... show product >>
Article no. 11970 = Screw adapter ... show product >>