40 Jahre
 

Dübelanker ZV-Welle in Anwendung

Sie sind hier: Products > Cavity wall ties > Cavity wall tie model ZV-Welle

Cavity wall tie model ZV-Welle

The cavity wall tie model ZV-Welle, approved by the supervisory building authority Deutsches Institut für Bautechnik, is a one-piece fastening component consisting of a V4A wire anchor (stainless steel grade 316 and pre-assembled B3S plug)

DBGM (German design patent) approved for cavity width up to 250 mm.

The cavity wall tie model ZV-Welle can be used for fixing brick facing to back walls of concrete and solid brick. The processing time is reduced to a minimum due to the pre-assembly of the two components. Due to the wavy end there is no need to bend the anchor into the outer leaf.

Processing mistakes are nearly impossible as a drive in pipe is included to each box.

  • Further dimensions available on request
  • Actual length = name less 25 mm, due to no need of bending
  • Incl. 1 drive-in pipe per box
Product images
Article data

Article no. Name Cavity width Box
13010 4,0 x 180 up to 45 mm 250
13020 4,0 x 210 up to 75 mm 250
13030 4,0 x 250 up to 115 mm 250
13040 4,0 x 275 up to 140 mm 250
13050 4,0 x 300 up to 165 mm 250
13060 4,0 x 320 up to 185 mm 250
13070 4,0 x 350 up to 215 mm 250
13075 4,0 x 375 up to 240 mm 250
13080 4,0 x 400 up to 265 mm** 250

** approvd up to 250 mm cavity width

Accessories:
Article no. 11240 = Iso-Clip black ... show product >>
Article no. 11230 = Iso-Clip ... show product >>
Article no. 11200 = Clamping plate ... show product >>  
Article no. 11000 = Water draining disc ... show product >>  

Certificates
Product information

∧ Seitenanfang