40 Jahre
 

Beton Einschlaganker ZM-Welle in Anwendung

Sie sind hier: Products > Cavity wall ties > Concrete drive-in wall tie ZM 4-6

Concrete drive-in wall tie model ZM 4-6

The concrete drive-in wall tie model ZM 4-6  is a one-piece fastening component made entirely from V4A high-grade stainless steel and consisting of a wire anchor with a pre-assembled expanding sleeve.

The system can be used for fixing brick facing to back walls of concrete (fire protection category A DIN 4102). The processing time is reduced to a minimum due to the pre-assembly of the two components. 

  • Further dimensions available on request
  • Finish in stainless steel A2 also available
Product images
Article data

Article no. Dimensions Cavity width Box
13800 4 x 200 mm up to 85 mm 250
13805 4 x 250 mm up to 135 mm 250
13815 4 x 275 mm up to 160 mm 250
13820 4 x 300 mm up to 185 mm 250
13830 4 x 325 mm up to 210 mm 250
13835 4 x 360 mm up to 245 mm 250
13840 4 x 400 mm up to 285 mm 250
13845 4 x 500 mm up to 385 mm 250

Accessories:
Article no. 11230 = Iso-Clip ... show product >>
Article no. 11200 = Clamping plate ... show product >>  
Article no. 11000 = Water draining disc ... show product >>  
Article no. 11000 = Hammer action drill ... show product >>  
Drive-in pipe, various dimensions

Product information

∧ Seitenanfang