Plug cavity wall tie PU-Welle
- System of cavity wall tie and insulation fixing for fixing of hard insulation boards on back walls of aerated concrete, concrete or solid masonry.
- Approved for cavity width up to 250 mm even for aerated concrete
- Material of the wall tie: stainless steel 1.4401 / 1.4362.
- Minimisation of thermal bridges, the hard insulation boards will not pushed over the wall ties.
- „Clean“ processing, the drill hole will be covered completely by the insulation fixing.
- Due to the wavy end there is no need to bend the anchor into the outer leaf.
- For use in aerated concrete, the SDS special drill, according to the approval, is required
- Incl. 1 drive-in pipe per box
- Actual length = name less 25 mm, due to no need of bending
|Article no.||Name||Insulation thickness||Air layer||Box|
|10500||155/250||up to 105 mm||up to 20 mm||250|
|10510||155/275||up to 105 mm||up to 40 mm||250|
|10520||155/300||up to 105 mm||up to 60 mm||250|
|10530||175/275||up to 125 mm||up to 20 mm||250|
|10540||175/300||up to 125 mm||up to 50 mm||250|
|10550||175/350||up to 125 mm||up to 100 mm||250|
|10560||195/300||up to 145 mm||up to 30 mm||250|
|10570||195/350||up to 145 mm||up to 80 mm||250|
|10514||210/310||up to 160 mm||up to 25 mm||250|
|10516||210/325||up to 160 mm||up to 40 mm||250|
|10524||230/325||up to 180 mm||up to 20 mm||250|
|10526||230/350||up to 180 mm||up to 45 mm||250|
|10544||250/350||up to 200 mm||up to 25 mm||250|
|10546||250/375||up to 200 mm||up to 50 mm||250|
|10554||270/375||up to 220 mm||up to 30 mm||250|
|10556||270/400||up to 220 mm**||up to 55 mm||250|
|10574||290/375||up to 240 mm||up to 10 mm||250|
|10576||290/400||up to 240 mm**||up to 35 mm||250|
|10584||310/400||up to 260 mm**||up to 15 mm||250|
|10586||310/425||up to 260 mm**||up to 40 mm||250|
** approved up to 250 mm cavity width