Press

Press releases

We are constantly developing new and innovative products for fastening technology. In our press releases we would like to inform you about the latest developments and innovations.

Up to 400mm shell spacing -" New ZV-Welle/5 Cavity wall tie with strain relief | 06.07.2020

In addition to the extension of the approval for our classic anchor ZV-Welle up to 250 mm shell spacing, we were also able to extend the approval for the new anchor ZV-Welle up to 250 mm shell spacing with the new anchor ZV-Welle. ZV shaft/5 a significant extension of the permitted shell spacing to reach a whopping 400 mm.

New approval - wire anchor up to 250mm | 18.08.2015

It's finally here: The general building authority approval for shell distances up to 250 mm and for use for buildings up to 25 m high. This means that recalculations or lengthy approvals in individual cases as well as the associated time and expense are now a thing of the past.

Cavity wall tie DUO from BEVER | 14.03.2012

The new Cavity wall tie type DUO is a two-part system with sheet metal and wire part. The separate processing of the two system components ensures the greatest possible safety and speedy work.

Success type wall connector becomes safer | 17.05.2011

With increasing thermal insulation, the question of the thermal bridge influence of air layer anchors arises more and more. BEVER, a specialist in connection technology for double-skin masonry, has investigated the issue and had two different products from its current range tested at RWTH Aachen University.

For hard insulation materials: Cavity wall tie PU shaft | 07.01.2010

For the simple and secure fixing of hard insulation materials in double-skin masonry, there is now a wire anchor with general building authority approval from the German Institute for Building Technology, DIBt for short.

Multi - Plus, the Cavity wall tie for special cases | 17.01.2009

The BEVER wire anchor range has proven itself in the anchoring of facing shells due to its simple processing and technical safety.

Being on the ball with WELLTEC | 17.01.2009

The entire air-layer wire anchor range has been converted to WELLTEC Time is money, and this also applies to the anchoring of facing brickwork. The work is much quicker with air-layer anchors from BEVER.

Multi-Cavity wall tie for double-skin masonry | 17.01.2009

Multi Cavity wall tie for double-skin masonry Easy processing - optimised storage The Bever - Multi - Cavity wall tie means measurable time savings when raising clinker facades.

Wall connection newly regulated | 17.01.2009

Bever, Kirchhundem, has developed a new wall connector made of V4A stainless steel and received a building authority approval for it from the German Institute for Building Technology (DiBt).

New Cavity wall tie for double-skin masonry | 17.01.2009

Bever has developed a new Cavity wall tie - the Well-L for double-skin masonry. With some clear advantages for users such as the stocking specialist trade.

Cavity wall tie for wooden substrates | 17.01.2009

The fastening experts at BEVER have succeeded in getting air-layer anchors for screwing and hammering into timber substrates approved by the building authorities.