Cavity-Wall-Tie-Finder
Finding the right cavity wall tie
Our service serves as an initial orientation as to which type of cavity wall tie can be used.
Use the cavity wall tie tool to calculate the required number of cavity wall ties in your project or get an overview of the common anchor types and their use in the Cavity-Wall-Tie-Finder.
Cavity wall tie Tool
In just a few steps, you can not only select the type and dimensions of the cavity wall ties, but you can also determine the required number of pieces after entering the wall area, wind load zone and building height.
After you have entered and printed the data, please send us your enquiry or order.
Please note that sales are handled exclusively by specialist dealers. Should you have any questions, please do not hesitate to contact us by telephone.
Scroll through the list and select your back wall here.
Masonry
| Backing brickwork | Masonry with normal mortar joint |
| Note | according to DIN 1053 / DIN EN 1996 ( EC 6 ) |
| Cavity width | from 40-250 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Cavity wall tie model Well-L Further information |
Solid brick
| Backing brickwork | Solid brick |
| Note | NO |
| Cavity width | from 40-150 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Cavity wall tie type DUO Further information |
| Backing brickwork | Solid brick |
| Note | NO |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
Vertical perforated brick
| Backing brickwork | Vertical perforated brick |
| Note | MG II a or MG III |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
Sand-lime brick
| Backing brickwork | Sand-lime brick |
| Note | MG II a or MG III |
| Cavity width | from 40-150 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Cavity wall tie type DUO Further information |
| Backing brickwork | Sand-lime brick |
| Note | MG II a or MG III |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
Hollow blocks
| Backing brickwork | Hollow blocks of lightweight concrete |
| Note | Outer webs thicker than 50 mm with MG IIa or MG III |
| Cavity width | from 40-150 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Cavity wall tie type DUO Further information |
| Backing brickwork | Hollow blocks of lightweight concrete |
| Note | Outer webs thicker than 50 mm with MG IIa or MG III |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
KS - facing bricks
| Backing brickwork | KS - facing bricks |
| Note | Thin-bed mortar |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
KS - Plane elements
| Backing brickwork | KS plan elements |
| Note | Thin-bed mortar |
| Cavity width | from 40-150 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Cavity wall tie type DUO Further information |
| Backing brickwork | KS plan elements |
| Note | Thin-bed mortar |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
Aerated concrete - Flat blocks
| Backing brickwork | Aerated concrete -" Flat blocks |
| Note | Thin-bed mortar |
| Cavity width | from 40-150 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Cavity wall tie type DUO Further information |
| Backing brickwork | Aerated concrete -" Flat blocks |
| Note | Thin-bed mortar |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
Aerated concrete - flat elements
| Backing brickwork | Aerated concrete -" Plane elements |
| Note | Thin-bed mortar |
| Cavity width | from 40-150 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Cavity wall tie type DUO Further information |
| Backing brickwork | Aerated concrete -" Plane elements |
| Note | Thin-bed mortar |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
| Backing brickwork | Aerated concrete - flat elements |
| Note | Thin-bed mortar |
| Cavity width | from 100-250 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-Plus-Cavity wall tie Further information |
Thin-bed mortar
| Backing brickwork | Thin-bed mortar |
| Note | NO |
| Cavity width | from 40-150 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Cavity wall tie type DUO Further information |
| Backing brickwork | Thin-bed mortar |
| Note | NO |
| Cavity width | from 100-170 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-cavity wall tie Further information |
| Backing brickwork | Thin-bed mortar |
| Note | NO |
| Cavity width | from 100-250 mm |
| Existing building | NO |
| New building | YES |
| Recommended anchor | Multi-Plus-Cavity wall tie Further information |
Scroll through the list and select your back wall here.
Normal concrete
| Backing brickwork | Normal concrete >= B 15 according to DIN 1045 |
| Note | NO |
| Cavity width | from 40-400 mm |
| Existing building | YES |
| New building | YES |
| Recommended anchor | up to 250 mm Cavity wall tie type ZV shaft Further information |
| Recommended anchor | from 200 to 400 mm Cavity wall tie type ZV-Welle/5 Further information |
| Backing brickwork | Normal concrete >= B 15 according to DIN 1045 |
| Note | for hard insulation materials (PUR or PIR) |
| Cavity width | from 40-250 mm |
| Existing building | YES |
| New building | YES |
| Recommended anchor | Cavity wall tie PU - shaft Further information |
Solid brick
KS - solid brick
Aerated concrete
Wall panels
| Backing brickwork | Wall panels made of aerated concrete reinforced and approved |
| Note | NO |
| Cavity width | from 40-250 mm |
| Existing building | YES |
| New building | YES |
| Recommended anchor | Cavity wall tie model PB 10 Further information |
Wall boards
| Backing brickwork | Wall panels reinforced with steam-hardened aerated concrete of at least strength class 3.3 |
| Note | NO |
| Cavity width | from 40-250 mm |
| Existing building | YES |
| New building | YES |
| Recommended anchor | Cavity wall tie model PB 10 Further information |
Hollow blocks / perforated bricks / vertically perforated bricks
Wooden substructure
You have questions?
We will be happy to help you.
- +49 - 2723 - 9760 - 0
- info@bever.de
