Cavity wall tie type ZV shaft
Homepage » Products » Cavity wall ties & accessories » Cavity wall tie model ZV-Welle

The building authority approved cavity wall tie type ZV - Welle is a one-piece fastening element consisting of stainless steel Werkst.Nr. 1.4401 / 1.4362 / 1.4462 wire anchor and factory pre-assembled polyamide dowel.
Approved by the building authorities up to 250 mm Tray spacing.
The cavity wall tie model ZV-Welle/5 can be used for fixing brick facing to back walls of concrete and solid brick. The processing time is reduced to a minimum due to the pre-assembly of the two components. Due to the wavy end there is no need to bend the anchor into the outer leaf.
Processing mistakes are nearly impossible as a drive in pipe is included to each box.
- Further dimensions available on request
- Actual length = name less 25 mm, due to no need of bending
- Incl. 1 drive-in pipe per box
Article Data
Art. No | Name | Cavity width | Box |
---|---|---|---|
13010 | 4,0 x 180 | up to 45 mm | 250 |
13020 | 4,0 x 210 | up to 75 mm | 250 |
13030 | 4,0 x 250 | up to 115 mm | 250 |
13040 | 4,0 x 275 | up to 140 mm | 250 |
13050 | 4,0 x 300 | up to 165 mm | 250 |
13060 | 4,0 x 320 | up to 185 mm | 250 |
13070 | 4,0 x 350 | up to 215 mm | 250 |
13075 | 4,0 x 375 | up to 240 mm | 250 |
13080 | 4,0 x 400 | up to 265 mm** | 250 |
Cavity wall tie ZV shaft for use in direct proximity to the coast made of stainless steel 1.4462
Art. No | Name | Cavity width | Box |
---|---|---|---|
13400 | 4,0 x 180 | up to 45 mm | 250 |
13405 | 4,0 x 210 | up to 75 mm | 250 |
13410 | 4,0 x 250 | up to 115 mm | 250 |
13415 | 4,0 x 275 | up to 140 mm | 250 |
13420 | 4,0 x 300 | up to 165 mm | 250 |
13425 | 4,0 x 320 | up to 185 mm | 250 |
13435 | 4,0 x 350 | up to 215 mm | 250 |
13450 | 4,0 x 375 | up to 240 mm | 250 |
13455 | 4,0 x 400 | up to 265 mm** | 250 |
**approved by the building authorities up to 250mm shell distance
Accessories
You have questions?
We will be happy to help you.
- +49 - 2723 - 9760 - 0
- info@bever.de
